Stainless Steel Submersible Pump is used to transport fluids for various applications and are the center of most industrial processes. The fact is that low pump productivity leads to excessive energy use and higher maintenance and repair costs. By maximizing system performance, you will reduce the overall costs associated with operating and maintaining the system.
The best efficiency point or BEP is one of the key indicators of pump performance. BEP refers to the flow rate at which your pump runs most efficiently. Generally, most pumps deviate from the flow point to some extent. However, you need to ensure that your pump only does this to a small extent. When monitoring pump performance and efficiency, monitoring the closeness of the pump to the flow point is one of the best starting points. By monitoring the BEP, you can make adjustments and ensure that your pump is running at the most efficient flow rate to maximize performance and reduce maintenance and repair costs.
If you are operating too far from the BEP, you may not be able to use the pump as efficiently as possible. Operating the pump far away from the BEP for a long time can also cause excessive wear on the system, which may lead to pump failure.
Cavitation can damage the pump casing and, over time, may cause the pump to malfunction, because operating the pump too far away from the BEP will cause an imbalance in the internal forces of the system, which will wear the system.
Consider the flow rate of the fluid in the system. If the flow rate is inefficient and bubbles form and collapse violently, the casing inside the pump will obviously be hit. Now, assuming your Stainless Steel Submersible Sewage Pump keeps beating for a year, you can see how cavitation causes excessive wear on the system, leading to increased maintenance and repair costs.