Dyeing Fabric Wholesaler Introduces The Use Of Cut Flower Processing
days hours remaining
Dyeing Fabric Wholesaler introduces the technology and flow of cutting flower processing;
Weave part of the warp yarn or weft yarn to the surface, and then cut the yarn floating on the fabric. The cut cloth is divided into warp cut flowers and weft cut flowers. The weft cut flowers simply cause the problem of thin and dense roads, and Wasted weaving man-hours. Cut flower cloth is a kind of decorative cloth, and the price is also expensive and cheap.
The cutting of flowers is usually finished on the shearing machine by the patterned shearing roller which lifts up the fabric. The suede part protruding from the convex part of the pattern shearing roller is cut off, while the suede part not protruding in the concave part of the pattern shearing roller is not cut, and constitutes an outstanding patterned suede surface. However, the diameter of the pattern shearing roller is very small, so the longitudinal height of the complete pattern is exactly equal to the circumference of the pattern shearing roller, which limits the use of this method. There is a computer-controlled combined sheet pattern shearing device. Each sheet of the combined sheet with a width of the machine is controlled by a computer through a pneumatic device. The protruding part of the thin sheet is cut off; the recessed part of the thin sheet is not trimmed, and a pattern of uneven suede is formed.
Cut flowers are attributed to jacquard. According to different organizations, all the warp yarns or weft yarns are lifted up in the required area, so that the warp yarns and weft yarns are not intertwined! Then form a certain pattern, so that the fabric has a strong sense of layering.
Through the above introduction, Washed Silk Fabric Wholesaler hopes that you can simply refer to the content of this article in future use.